Put Radar Base on your home Wi-Fi
Once Radar Base is on your home network, any phone, tablet or computer at home can open it at http://kymradar.local. Your devices stay on your normal Wi-Fi.
Set it up
Choose one way:
- From the app (USB or hotspot): Device settings → Home Wi-Fi → pick your network → enter the password → Connect.
- From a serial terminal:
wifi <network-name> <password>(no spaces in either).
Radar Base needs a 2.4 GHz network. Most home routers offer 2.4 GHz and 5 GHz under the same name, which is fine.
Open it
- On computers, iPhones, iPads and Macs: http://kymradar.local
- On some Android phones
.localnames do not resolve. Use the IP address shown under Device settings → Home Wi-Fi
(for example http://192.168.1.57), or look the device "kymradar" up in your router's list.
What happens to the hotspot
The Radar Base hotspot switches itself off once your home Wi-Fi works and no phone is connected to it. It comes back on its own if the home network is gone for 30 seconds - see Hotspot fallback.
Change or remove the network
Device settings → Home Wi-Fi → Forget network, or on the console wifi forget. The hotspot turns on again.
Privacy
Radar Base only talks to devices on your own network. It has no cloud connection and sends no data anywhere.
Volume, pre-flashed modules or custom firmware: Kymopsis B2B